Kubotek Forum

KeyCreator & KeyCreator Viewer Technical discussion of CAD/CAM and integrated partner products
Kubotek Forum > KeyCreator & KeyCreator Viewer > Affinity for circles/arcs View modes: 
User avatar
Member
Member
Cliff - 8/24/2019 6:13:40 AM
   
Affinity for circles/arcs
I have noticed that 2019 has an afffinity for circles and arcs when selecting entities. Sometimes it requires a close zoom to get it to select a line that is close to an arc.

In the "Tools>Application Options>Positioning/Selection>Entity List Order" Arcs is after lines, but still selects first.

Anyone else see this? Anyone have a suggestion?

TIA
Cliff

Cliff
Asus G752 Laptop i7-6820K
Win 10

User avatar
Advanced member
Advanced member
michael@gutmandesign.com - 8/25/2019 4:02:58 PM
   
RE:Affinity for circles/arcs
Hi Cliff,

Go to Tools / Application Options & click on Positioning/Selection.

Look at "Hybrid Selection Mode".  If Position priority is checked then your snap settings will override your preferred entity order.  Should you have your snap set to 2d interesection then it will be even harder to predict the entity selected.  Of course you can toggle with the space (default) key but that is slowing down the selection process.

"Entity Priority" will follow the Entity List Order so check it to bypass snapping.  Since snapping is disabled by holding down the the control key, you could have the best of both options by using the control key with "Position Priority".

Lastly, look at your cursor size.  If you have customized it to be larger than default then consider specifying  a fixed, smaller search radius.   Note that if your drawings tend to be "crowded" with entities then look at increasing the maximum number of entities to search.  Go in steps of ten until you get the desired performance.

Hope that helps!
Mike





1
Login